Wholesale SS Hydraulic JIC Fittings
JIC 37 Degree Fittings comply with SAE J514 & ISO 8434-2 standards, which have a 37° cone seat on the female fittings and a 37° flare on the male fittings.
JIC 37 Degree Fittings are most commonly known as JIC fittings to make a connection with the JIC male or female fittings. Besides, JIC fittings are also can be used as compression tube fittings. JIC Tube Fittings consist a JIC 37 degree male fitting body, a JIC nut, and a JIC sleeve to make a tube assembly.
QC Hydraulics has been supplying stainless steel JIC 37 Degree Fittings. Our stainless steel JIC 37 Degree Fittings are manufactured from high quality stainless steel 316L to ensure the fittings can be used in harsh working environment. Like salty water, corrosion… These fittings are widely used in high pressure application, as it can withstand up to 430 Bar working pressure.
Size Range:
1/8”-2”
Material:
Stainless Steel(SS 304, SS 316, SS 316L, SS 316Ti)
JIC Hydraulic Adapters available thread configurations:
- JIC Male Union
- JIC Elbow
- JIC Tee
- JIC Cross
- JIC Male Plug
- JIC Tube Nut & Sleeve
- JIC Cap
- JIC Swivel Connector
JIC Hydraulic Tube Fitting, Pressure Ratings
| Pressure Ratings For Fittings With JIC 37° Flare Swivels, O-ring Port Plugs and Straight Thread Stud Ends(Inch) | |||||||
| Nominal Pipe Size | Threads Size (Notes 1&2) | Working Pressure(Mpa) | |||||
| Nom SAE Dash Size | Nom Inch Tube O.D | SAE J514 Flare & SAE J1926/ISO 11926-3 O-ring Port Thread Size | 37° Flare Tube End, Union and Bulkheads | 37° Female Swivels | Port Plugs/Non Adjustable Stud | Adjustable Stud | |
| -2 | 1/8 | 5/16-24 UNF | 34.5 | 34.5 | 34.5 | 34.5 | |
| -3 | 3/16 | 3/8-24 UNF | 34.5 | 34.5 | 34.5 | 34.5 | |
| -4 | 1/4 | 7/16-20 UNF | 34.5 | 31 | 34.5 | 31 | |
| -5 | 5/16 | 1/2-20 UNF | 34.5 | 27.5 | 34.5 | 27.5 | |
| -6 | 3/8 | 9/16-18 UNF | 34.5 | 27.5 | 34.5 | 27.5 | |
| -8 | 1/2 | 3/4-16 UNF | 31 | 27.5 | 31 | 27.5 | |
| -10 | 5/8 | 7/8-14 UNF | 24 | 21 | 24 | 21 | |
| -12 | 3/4 | 1 1/16-12 UNF | 24 | 21 | 24 | 21 | |
| -14 | 7/8 | 1 3/16-12 UNF | 21 | 17 | 21 | 17 | |
| -16 | 1 | 1 5/16-12 UNF | 21 | 17 | 21 | 17 | |
| -20 | 1 1/4 | 1 5/8-12 UNF | 17 | 14 | 17 | 14 | |
| -24 | 1 1/2 | 1 7/8-12 UNF | 14 | 10.5 | 14 | 10.5 | |
| -32 | 2 | 2 1/2-12 UNF | 10.5 | 8 | 10.5 | 8 | |
- Threads per SAE J475 Class 2A ext. Class 2B int.(Ref。ISO-263/ISO-R725)
- Unified class 2B threads apply to swivel nuts and with minor diameter modified to class 3B limits for locknuts.
Send us a message if you have any questions or request a quote.
Request A Quote
Send Your Message Via the Form Below